Package deal Includes:
1pc x Pixracer V1.0 Flight Controller
1pc x CNC Case (, golden, red, blue selectable)
1pc x protection switch + buzzer
1pc x Power Module Cable
1pc x Serial Cable
1pc x I2C Cable
1pc x Receiver Cable
1pc x WiFi ESP8266 Module
1pc x Micro SD Card + Reader
MCU - STM32F427VIT6 rev. 3
PCB size 36mm * 36mm
FRAM - FM25V02-G
LDO Ultra reduced sound LDOs for sensors and also FMU
MPU9250, ICM20608, baro MS5611, magazine HMC5983
Connectors - GPS+I 2C, RC-IN, PPM-IN, RSSI, SBus-IN, Spektrum-IN, USART3 (TxD, RxD, CTS, RTS ), USART2 (TxD, RxD, CTS, RTS ), FRSky-IN, FRSky-OUT, CAN, USART8 (TxD, RxD ), ESP8266 (full collection ), SERVO1-SERVO6, USART7 (TxD, RxD ), JTAG (SWDIO, SWCLK ), POWER-BRICK (VDD, Voltage, Current, GND ), BUZZER-LED_BUTTON
MicroSD memory card reader
WiFi ESP8266 802.11 bgn (Included!)
This well-known add is actually a quite flexible solution,, you may intend to check its own wiki as effectively: http://www.esp8266.com/wiki/doku.php...th-the-esp8266 But put on ´ t be terrified, the included WiFi Module is actually happening prepared to go!
JST GH collection ports for effortless and also strong outer relationships, DF13 misanthropes will love those!
Dimensions - 36 x 36mm along with 30.5 x 30.5 mm opening framework along with 3.2 mm openings
Body Weight Pixracer - (feature SD and also CNC defensive case) 26g
5 kinds of professional adaptable silicone cords for nearly any sort of outer component included.
Power supply - 5-5.5 VDC from USB or Power Brick adapter.
NOTE! The Power must be between5.0VDC to 5.5VDC!
The VDD_SERVO rail is NOT connected to thePixracer power!
THE MAX ALLOWABLE TOTAL CURRENT CONSUMPTION FOR ALL PERIPHERALS IS 1A! Importance: Don't connect the VCC of servos or HighPower Telemetry/OSD modules.
The new Pixracer (formerly called XRacer) is available now and its fully supported by the Arducopter and PX4 community